22
Delivery scope
Delivery scope
Delivery scope
Delivery scope
2 x height-adjustable glass shelf, 1 x vegetable box with glass cover, 3 x door storage rack, 2 x egg-
tray, 3 x freezing drawer, 1 x ice-cube tray
For the reverse of the door opening:
1 x blind cap (A), 1 x door stopper (3)
Installation
Installation
Installation
Installation
Conditions for the installation location
Conditions for the installation location
Conditions for the installation location
Conditions for the installation location
•
Good ventilation is required around the appliance, in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power consumption. Sufficient clearance must be cre-
ated for this purpose:
-
Gap to the back and to the side walls each approx. 5 cm;
-
Clearance in front of the appliance must be created so that the appliance door can open with-
out being impeded.
•
Only install at a location with an ambient temperature suitable for the climate class of the appli-
ance. For information on the climate class, please refer to chapter “Technical Data” or to the rating
label located in the appliance interior or rear side.
•
Place the appliance only on a steady and safe surface. If the appliance is not horizontally leveled,
adjust the feet accordingly.
•
The appliance must be set up in such a way that the mains socket is easily accessible.
•
Avoid the installation:
Avoid the installation:
Avoid the installation:
Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible
to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.) and in rooms which
may have poor air circulation (e.g. garages).
Electrical connection
Electrical connection
Electrical connection
Electrical connection
WARNING:
WARNING:
WARNING:
WARNING:
•
The installation to the mains supply must conform to the local standards and regulations.
•
Improper connection may cause to an electric shock
electric shock
electric shock
electric shock!
•
Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
•
The accessibility of the power plug must be ensured in order to disconnect the appliance from the
power supply in case of an emergency.
CAUTION
CAUTION
CAUTION
CAUTION::::
In case you disconnect the appliance or in case of power failure:
- Wait for approx. 5 minutes before restarting the appliance.
- Check the operation settings.
