25
• Do not try to repair the appliance on your own. Always contact an
authorized technician. To avoid the exposure to danger, always have
faulty cable be replaced only by the manufacturer, by our customer
service or by qualified person and with a cable of the same type.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capa
-
bilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
• Children must not play with the appliance.
• Cleaning and user maintenance must not be carried out by chil-
dren, unless they are supervised.
Commissioning
• Fully unwind the mains cable.
• Fit on a nozzle.
• You can dry single hair locks by concentrating the flow
of hot air with the hairdressing nozzle.
• The diffuser is the ideal solution to dry curly hair without
losing volume.
• In order to replace the attachment, first remove the old at
-
tachment by pulling it off and then pushing on the new one
until it clicks into place.
• Only connect the machine to a properly installed safety
socket.
Setting the Temperature Level ( switch):
Position 1: low temperature
Position 2: medium temperature for gentle drying and
shaping.
Position 3: high temperature for rapid drying.
Setting the Temperature Level ( switch):
Position 0: off
Position 1: gentle stream of air
Position 2: strong stream of air
COOL SHOT (Cold Air)
With this switch you can stop the heating
process.
Switch-off
• After use, move the right-hand switch ( ) to the “0” posi
-
tion and remove the mains plug from the socket.
• Leave the device to cool before putting it away!
• Hang the device up by the suspension eye.
Ionisation function –
reducing electrically charged hair
The dryer is also equipped with an ioniser, which when
switched on gives off negative ions with the air that is expelled.
This process helps to protect the hair when it is being dried
while simultaneously helping to improve hair structure, increase
the volume of the hair, produce a silky sheen and also reduce
the static charge of the hair.
This process is particularly gentle for stressed hair.
Turn the hairdryer on by moving the “ ” switch to the “I” posi
-
tion. The control lamp lights up in green. To turn the device off,
move the switch to “0”.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damage.
Hold the button down in this position according to the
desired interval length. When the button is released it
returned automatically to the initial position.
Cleaning and care
• Before cleaning remove the mains lead from the socket.
• The device must never be immersed in water!
• Clean the housing with a soft, dry cloth without additives.
Summary of Contents for HTD 807 CB PROFI
Page 5: ......
