BOMANN GT 359, Instruction Manual

Page: 19 / 28

19
Installation
Installation Installation
Installation
Condition
Condition Condition
Conditions for the installation location
s for the installation location s for the installation location
s for the installation location
NOTE
NOTE NOTE
NOTE::::
The unit has wheels which facilitate the transportation and installation of the appliance. Tilt the appliance back
slightly and move it gently.
•
Good ventilation is required around the appliance, in order to dissipate the heat properly and to guarantee
efficient cooling operation at low power consumption. Sufficient clearance must be created for this pur-
pose:
-
Gap to the back and to the side walls each approx. 10 cm;
-
Clearance on the top of the appliance must be created so that the appliance lid can open without be-
ing impeded.
•
Only install at a location with an ambient temperature suitable for the climate class of the appliance. For
information on the climate class refer to the chapter “Technical Data” or to the rating label located in the in-
terior or at the appliance back.
•
Place the appliance on a steady and safe surface. If the appliance is not horizontally leveled, adjust the
feet accordingly.
•
Install the appliance for the wall socket to be freely accessible.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to cor-
rosion under such circumstances;
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.) and in rooms which may have
poor air circulation (e.g. garages).
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING:
WARNING: WARNING:
WARNING:
•
The installation to the mains supply must conform to the local standards and regulations.
•
Improper connection may cause to an electric shock electric shock electric shock electric shock!
•
Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet by
an authorized specialist.
•
The accessibility of the power plug must be ensured in order to disconnect the appliance from the power
supply in case of an emergency.
CAUTION
CAUTION CAUTION
CAUTION::::
In case you disconnect the appliance or in case of power failure:
- Wait for approx. 5 minutes before restarting the appliance.
- Check the operation settings.