23
•
Transfer the upper door hinge at the opposite appliance
side, after you have unscrewed the hinge pin and used
by the other hinge side. Put the hinge pin in the hole of
the appliance door
and tight the screws of the hinge.
•
Replace the appliance cover, which you have removed
at the beginning. Tight the screws and clip the screw
covers on.
•
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of the
door is ensured.
•
Dismount the door handle and attach it to the corresponding other door outer side. Refer to the instructions
in "Assembling the door handle". Transfer the cover caps on the exposed holes to the respective other
door outer side.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION
CAUTION
CAUTION
CAUTION::::
After transport, the appliance should be left standing upright for about 4 hours before connecting to the power
supply. Nonobservance could lead to malfunction of the cooling system and causes a breakdown of the appli-
ance.
Clean the interior of the appliance including all accessory parts located inside. Consider the instructions which
we provide in the chapter “Cleaning”.
Starting the appliance
Starting the appliance
Starting the appliance
Starting the appliance
•
Connect the appliance to the power supply; the control lamp POWER lights.
•
Operate the temperature control, which is located at the appliance front. See also the following section
"Control panel / Settings".
Control panel
Control panel
Control panel
Control panel / Settings
/ Settings
/ Settings
/ Settings
Temperature control
Temperature control
Temperature control
Temperature control
Setting COLD
lowest setting (warmest inside temperature)
Setting MID
medium setting (optimal operating temperature)
Setting COLDER
highest setting (coldest inside temperature)
The power levels COLD – COLDER regulates the different values of the internal temperature.
