BOMANN CL 6045 QC CB, Instruction Manual, Page: 101 / 170

CL6045QCCB_IM 17.12.20
101
Malfunction / Breakdown Possible Cause
The appliance is not responding to signals /
entries.
The remote control is not close enough to the receiver for the interior unit.
There is insufficient voltage remaining in the batteries for the remote control.
Obstacles placed between the remote control and the receiver
The display is switched off. Activated LED function
Voltage error
The ECO function is activated (see chapter on servicing) “Energy saving mode (ECO)”)
Functions or features are absent from the
display
Not all functions or features are shown for each operating mode (see chapter “Operation”)
In this case, switch the appliance off immediately and disconnect the power supply:
Unusual noises during operation
Error in the control board
Blown fuses or broken switch
Spray water or objects in the system
Overheating / burnt cable or plug
Strong odor emanating from the appliance
Error codes in the display
If an error occurs, the following error codes will appear in the display of the interior unit:
Lamp lights Description of error
Blinks once Indoor temperature sensor error
Blinks twice Outdoor temperature sensor error
Blinks six times The motor for the interior fan is malfunctioning
NOTE:
Additional error codes can be found in the service manual.