35
BS 1714 A CB_IM_new
23.06.16
Cleaning
WARNING:
Under no circumstances should you immerse the motor housing in
water in order to clean it. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The single components are not dishwasher-safe.
• Wipe the casing with a damp cloth.
• You can wipe the mains adapter unit with a dry cloth.
Components 6 to
8
• These components can be rinsed off under running water.
If need be, clean the components in warm soapy water
using a soft brush.
• Allow the components to dry before you reassemble the
device.
Floor Nozzle
Refer to Fig. H to J on Page 5.
•
Press the unlock button (21) to pull the floor nozzle off the
appliance holder.
• Remove threads and hair wound to the brush. Use
scissors, if required.
Storage
• Clean the appliance as described and allow it to dry.
• You can use the previously installed charging station for
storage.
• We recommend that you keep the appliance in the original
packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children in a
dry, well ventilated place.
Troubleshooting
Problem
Possible cause
Remedy
The device
does not
function.
The switch position
has not been set
correctly.
Check the switch
position.
The rechargeable
battery is empty.
Recharge the battery.
Problem
Possible cause
Remedy
Weak suction
power.
The battery is near-
ly discharged.
Charge the battery.
The filters are dirty. Clean the filters as
described under
“Cleaning”.
CAUTION:
Restart operation only
with dry filters.
Noise during
operation.
A foreign body has
been sucked into
the floor nozzle.
Remove the foreign
body. If required,
separate the floor
nozzle from the
appliance holder.
Technical Data
Model:.................................................................BS 1714 A CB
Net weight
(only battery-powered vacuum cleaner)
: ..........approx. 1,24 kg
Mains adapter
Protection class: .................................................................
Input:...................................
AC 100 - 240 V, 50 / 60 Hz, 0,3 A
Output: .......................................................DC 18 V, 200 mA
Polarity:....................................................................
Battery:
..........................................10 x 1.2 V, 1800 mAh NiMH
Operating time: .................................. 20 minutes maximum
Charging time: ........................................................12 hours
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.