Bomag BW 100 AD-5, Operating & Maintenance Instructions

Page: 161 / 212

Protective equip-
ment:
n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.7 „Parking the machine in
secured condition“ on page 113 .
2. Allow the engine to cool down.
3. Loosen the tensioning screw (1) and the
screw (2) on the generator.
4. Relieve and remove the V-belt.
5. Assemble a new V-belt at the generator.
6. Tension the V-belt to the specified value
Ä
Chapter 8.8.2 „Checking, tensioning the
V-belt“ on page 153 .
7. Retighten clamping screw (1) and screw
(2).
8.9.3
Checking the anti-freeze concentration and the condition
of the coolant
Protective equip-
ment:
n Protective gloves
n Safety goggles
1. Park the machine in secured condition
Ä
Chapter 6.7 „Parking the machine in
secured condition“ on page 113 .
2. Allow the engine to cool down.
3. Remove the cover (1) from the compensa-
tion tank and check the anti-freeze concen-
tration with a conventional tester.
4. Check the condition of the coolant.
5. Thoroughly flush the cooling system if the
coolant is contaminated by corrosion resi-
dues or other suspended matter
Ä
Chapter
8.11.2 „Changing the coolant“ on page 173 .
6. Close the cover again.
Fig. 131
Fig. 132
Maintenance – Every 500 operating hours
BW 100 AD-5 161