SG968D/S-10M
2
Cautions
Page
6
2
Cautions
★
The working voltage of the camera is 6V. The camera is
supplied by four or eight AA batteries.
★
Please install batteries according to shown polarity.
★
Must insert the SD card before power on camera. The
camera will not work properly unless a working SD card
is detected by the camera
★
Please unlock the write-protect before inserting the SD
card.
★
Please insert the SD card when the power switch is at
OFF position before testing the camera. The camera has
no internal memory for saving images or videos. If no SD
card is inserted, the camera will shut down automatically
after an indication.
★
Please do not insert or take out the SD card when the
power switch is at ON position.
★
It is recommended to format the SD card by the camera
when used for the first time. Many other SD cards
formatted by other cameras have poor compatibility with
different brands of cameras. So it is best to format the SD
card with this camera or on a computer.
★
In SETUP mode, the camera will shut down
automatically after 3 minutes if no operation is done.
Please turn on the power again if you want to continue to
work with the control.