MG982K-10M
Appendix
Ⅱ
: Error Code
Page 29
3939
3941
3942
Failed to open
network;
Network
not
deactivated;
Network error
Possible
Possible
Possible
Possible cause:
cause:
cause:
cause:
1. The GSM network is not good or not well
covered with the GPRS network.
2. The instability in signal transmission leads
to some MMS setting parameters missing
when the GSM base station do the data
analysis. If for the incorrect transmission
reason, the camera may show various error
code.
Suggestion:
Suggestion:
Suggestion:
Suggestion:
1. Contact the network provider if the GPRS
network is well covered in that area.
2. Change a place to try again. It’s better to try
in a public place, where there is always good
signal.
3. If the provider said there is GPRS signal
covered but the signal is weak, you can try to
use a enhanced antenna that is SMA type with
antenna gain of 10db.
-85
Not
enough balance
in SIM card;
MMS
setting error;
Possible
Possible
Possible
Possible cause:
cause:
cause:
cause:
1. The SIM card is not enough balance.
2. Not correct settings.
3.The GSM network is not good leading to a
timeout problem (very small probability).
Suggestion:
Suggestion:
Suggestion:
Suggestion:
1.Please check to make sure your SIM card has
enough balance.
2. Please check the MMS settings.
Other error code
Many codes in the list are used for debugging
in the product design phase. Most of them will
not be shown to consumers, so please ignore
the other error codes and contract us directly.
Thanks.
