2.Quick Start Guide
-6-
2.Quick Start Guide
What You Need
To use camera ,you need:
An unlocked SD card;
4 or 8 AA batteries,High-density and high-
performance alkaline batteries are recommended
A PC with a USB 2.0 port and the Internet access;
2.1Power Supply
★
1)Battery Power:Load 4 or 8 AA batteries
according to shown polarity. (The voltage of a
single battery need higher than 1.5V)
2)External Power:Insert 6V DC external power
adapter.
When in a low-battery state,the camera will be
automatically shut down after indication sounds.
Please change the batteries in this case.
NOTE:
The battery can be just a backup for emergency when
using external power or solar charging.
There will be risk of explosion if battery is replaced by an
incorrect type.
Please deal with waste battery according to the local rule.
2.2 Insert The SD Card
Insert a new SD card into the card slot. Please note
that the SD card is on the “write” (not locked)
position otherwise the camera will not function
correctly.