SG860U-12mHD
4 Advanced Operations
Page 13
and camera will take photos at given time
interval.
Please note that if the PIR Trigger is set to
Off
,
then the Time Lapse can’t be set to
Off
.
PIR Trigger
This parameter defines the sensitivity of the
PIR. There are four parameters: High, Normal,
Low and Off. The default value is “Normal”. The
higher degree indicates that the camera is more
easily triggered by motion, taking more pictures
or recording more videos. It is recommended to
use high sensitivity degree in a room or
environment with little interference, and to use
low sensitivity for outdoor or environment with
lots of interferences like hot wind, smoke, near
window etc. Furthermore, the sensitivity of the
PIR is strongly related to the temperature.
Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher
sensitivity for high temperature environment.
Please note that if the time lapse is set to Off,
then the PIR can’t be set to Off.
PIR Interval
This parameter means how long the PIR sensor
will be inactive after each triggering in ON mode.
During this time the PIR of the device will not
react to the motion of human (or animals). The
minimum interval is 0 second (meaning the PIR
works all the time). The maximum interval is 1
hour (meaning the PIR will be disabled for 1 hour
after each triggering). Please note that there are a
few seconds of internal processing delay between
each trigger, even if 0 second is set.
Camera Posit
You can set A-Z position for your camera so that
you can distinguish which photo is taken by
which camera.
Language
Choose the language you need. It supports four
language: English, Germany, Finnish and
Swedish.
