Pocket Camera SG550-8mHD
3 Easy Operations
Page
6
heat sources to prevent from false triggering.
2.
The height from ground for placing the camera should vary with the
object size appropriately. In general, one to two meters are preferred.
Slide the power switch to the ON position to power on the camera and enter
into the ON mode
.
After switching on the camera, the motion indication LED
(red) will blink for about 10s. The 10s is a buffering time before autonomic
capturing photos or videos, e.g. for closing and locking the bottom cover, fixing
the camera on a tree and walk away.
In TEST mode, it requires to connect the control then to do further
customizing settings, when the user complete the settings, it requires to unplug
the control to enter into normal use, that is, if the wired control still be
connected with the camera, the camera will not work. The camera (the control
must be unplugged when in ON mode) will take pictures or videos
automatically according to the default settings or preset customer settings.
3.4
Enter into the TEST Mode
Connect the wired control, then switch to the ON position and enter into the
TEST mode. There are some functions in TEST mode: Customer settings,
manual capture and preview. The control is needed in this mode.
3.4.1
Customer Settings
Press MENU on the control to enter into menu settings. The camera can be
taken over control to manually customize the camera settings which display on
the LCD screen on the camera. The detailed operations will be described in
“Advanced Operations” chapter.
3.4.2
Manual Capturing
Press SHOT to manually capture photos or record videos. It is also SHOT
key to stop the manual capturing of the video.
