SG565F-8mHD
3
Easy
Operations
Page
10
mode
.
After switching on the camera, the motion
indication LED (red) will blink for about 10
seconds. The 10 seconds is a buffering time
before autonomic capturing photos or videos,
e.g. for closing and locking the bottom cover,
fixing the camera on a tree, and walking away.
3.4
Enter into the TEST Mode
Connect the wired control, then switch to the
ON position and enter into the TEST mode.
There are some functions in TEST mode:
customer settings, manual capture, and preview.
The control is needed in this mode.
3.4.1
Customer Settings
Press MENU on the control to enter into
menu settings. The camera control can be taken
over to manually customize the camera settings
which display on the LCD screen on the camera.
The detailed operations will be described in
“Advanced Operations” chapter.
3.4.2
Manually Capturing
Press SHOT to manually capture photos or
record videos (daytime). It is also the SHOT key
to stop the manual capturing of the video.
3.4.3
View Images
or Videos
Press OK to view images, the latest image will
