14
|
Turning on the Flash and Firing a Test
Turning on the Flash and Firing a Test
To turn the flash on, simply slide the power switch to the On position.
When the flash is ready to fire, the Ready light will glow red. If the flash is mounted on your camera, a flash
icon will also appear in the camera’s viewfinder when you press the shutter-release button halfway.
To fire a test flash, press the Ready light / Test button.
Automatic power-saving function:
After 3 minutes of inactivity, the flash will automatically enter power-
saving mode to conserve battery life. The Ready light will turn off. To reactivate the VS-260SMI, simply press
the Ready light / Test button or your camera’s shutter-release button. During long periods of inactivity, it is
recommended that you use the power switch to turn the flash off completely.