16
SW 053-A.01-MANUAL Rev.00
Last update 02.12.2020
Assembly
9.1.3) Grease the filter holder flange pos.1 by the O-ring pos.26.
9.1.4) Put the filter holder flange pos.1 back in its seat.
9.1.5) Tighten the screws pos.2 using a torque wrench.
9.2) REPLACING THE DIFFUSOR POS.4
Disassembly
9.2.1) Remove the inlet filter as explained in section 9.1.1.
9.2.2) Use a 5 mm allen wrench to loosen the twelve screws pos.2 from the body pos.23,
see fig.9.02.
9.2.3) Remove the top casing pos.24 and push out the diffusor pos.4 (Fig. 9.03), then re
-
place it after having selected the desired diffusor as per table “A” chapter 8.
MAINTENANCE
Fig. 9.02
2
23
Fig. 9.03
24
4
27
9