
Bollo Full-HD 1080P
10
IX.
Network Setup
You can realize the network connection through build-in USB2.0 RJ45 Ethernet
adapter or an USB WIFI adapter. Bollo nmp-se support following WIFI chip types:
USB2.0 WIFI
:
Ralink RT2870/RT2770/RT307x/RT2070/RT3572
There will be more USB network chip supported in future, please take note of relevant
information on
http://www.hdhorizon.com
.
USB Ethernet Adapter installation:
1.
Connect with Ethernet cable(as shown):
2.
Start up Bollo NMP-SE, enter into “setting menu”
Æ
”network setting”, you should see
similar pictures as follows on the screen.