5. Cable Extension Options
Extend the cable run for your camera. Additional extension cable
separately, as below:
Cable Type
Max Cable Run
Distance
CAT5e [or higher] Ethernet cable
300ft {92m}
u
u
You can use a Rj45 coupler or switch {not included} to connect male
ends of Ethernet cable together.
To extend the cable run beyond 300ft {92m}, a switch will be required
{sold separately}
6. Connecting the Camera
To Camera:
To NVR:
1. Connect the Ethernet cable to the camera.
Note: A power adapter is not required for the use of
this camera.
2. Connect the other end of
the Ethernet cable to the NVR’s Camera In ports.
Note: The camera may take
up to 1 minute to power up
after.
Setup Diagram
Summary of Contents for BU-CP-80D2
Page 5: ...3 Dimensions ...
