Step 10
Page 9
You will need
Position top panel (P1) onto panels (P3), (P4) & (P5) as shown.
Make sure the groove in top panel (P1) is on the same side as the side panel (P3).
Insert 6 x cam nuts (H2) into panels (P3) and (P4), using a flat head screwdriver
turn clockwise to lock.
Step 11
You will need
Flat Head
Screwdriver
6 x Cam
Nuts (H2)
(P3)
(P4)
(P3)
(P1)
H2
H2
H2
H2
H2
H2
(P5)
If necessary, gently adjust the top panel (P1) sideways in either direction
until XX and YY are equal.
Holding it in place, fix 6 x back panel connectors (H7) to assembled unit
with 6 x screws (H6) as shown, using a phillips head screwdriver.
Phillips Head
Screwdriver
6 x Screws
16mm (H6)
6 x Back Panel
Connectors (H7)
H7
H7
H7
H7
H7
H7
(P5)
(P1)
(P1)
XX=YY
XX
YY
XX
YY
H7
H7
H6
(P5)
(P1)
(P5)
(P1)