9
Remote Controller
1. Power
2. Camera ID (Total 3) Selector
3. Preset Position (Total 6) Calling and Setting
4. PAN-TILT
Pan and Tilt direction control
HOME: Home position, Resolution reset
5. L/R Direction Set
Left and right orientation setting
6. ZOOM/FOCUS
Far
Near
7. Auto/Manual Focus
8. Back Light
9. Video Format Switching
You can change the video format by keep
pressing the button.
10. MENU
On screen menu display ON/OFF
11. Audio Switch
You can turn the Mic built in the camera Off/ON by
pressing the button once.
12. Fast/Slow Zoom Switching
13. White Balance
Change the White Balance setting by pressing
the button.
14. De-Flicker
When you find the video flicking, press the button
once to eliminate the flickers.
Notes
3V CR2032 Coin lithium Battery is not included with remote controller, you should purchase it at your local market.
3V CR2032 Coin lithium batteries are not interchangeable.
3V CR2032 Coin lithium battery Installation:
1. Find the battery compartment on the bottom of the remote controller
2. Use a cross screwdriver to unscrew, with a needle, press and slide the battery tray out
3. Remove the old battery.
4. With the positive side facing up toward you, put in the CR2032 battery.
5. Slide the battery back into the controller.
Summary of Contents for 8 Series
