19
PELCO P/D Keyboard RS485 Connection
•
Set RS422 control method on Bottom Dip Switch.
•
Set Baud Rate on Bottom Dip Switch to the same as Baud Rate setting on the keyboard you are using.
•
Set the camera ID on OSD menu by remote controller
•
Reboot the camera by turning it Off/On after the Bottom Dip Switch has been set up correctly.
•
Use PELCO P/D compatible keyboard.
•
Use preset 95# on the keyboard to bring up/exit camera OSD menu.
•
Use joystick and Button “OPEN” or “CLOSE” to navigate OSD menu.
•
To operate keyboard, please refer to the user manual of the keyboard you are using.
PELCO RS485 Connection
•
Use extension cables included RJ45 to RS422 Phoenix connecter adaptor to make RS485 connection for your control device.
