ISO 9001
24
http://bolid.ru
2.5.2
Reading the Status of an Addresable Device Using the PA Protocol
In the main menu use the buttons
to select the option
Read Parameters:
Select PA as the protocol type (see Section Adjusting the Data Communication Protocol).
Connect the addressable device to the programmer via the DIP-34A-03 base or via the base adapter
observing polarity and press
.
To stop searching and quit to the main menu, press
.
To stop searching as soon as the required device has been found, press
or wait until the
search is completed.
On completing the operation the result can be seen on the display:
– If no addressable device is found then the display will be as follows:
– If the addressable device is found then its address will be shown on the display:
To quit to the main menu, press
.
To read the status of the addressable device, press
.
1: Addressable device picture;
2: The code of the status of the addressable device;
3: The short description of the status type.
1
2
3
