Squeeze the trigger on the joystick and rotate the chute
4.
by hand to face forward. The holes in the chute rotation
assembly will be facing up. See Fig. 3-6.
NOTE:
The chute will not rotate without squeezing the
trigger on the joystick.
Rotate the joystick to 1 o’clock position so the silver arrow
5.
on the pinion gear faces upward See Fig. 3-7).
NOTE:
The joystick will be angled slightly to the right at the
one o’clock position. See “Top View” in Fig. 3-6.
NOTE:
The pinion gear is located on the front of the unit
below the control panel.
Insert round end of the hex rod (hole pointing upward) as
2.
far as possible into chute control assembly. See Fig. 3-4.
Place chute onto chute base with the hex rod positioned
3.
under the handle panel. Reinstall the hex bolt previously
removed
but do not secure with wing nut at this time
. See Fig.
3-5.
Fig. 3-7
Fig. 3-5
Fig. 3-4
Fig. 3-6
Top View
Chute Rotation
Assembly
8
S
ectioN
3— a
SSeMbly
& S
et
-u
p
Summary of Contents for 31BM53LE565
Page 28: ...28 Notes...
Page 29: ...28 Notes...