CORPORACIÓN BOIA DOMENICO C.A.
4.5. Post-Operation
4.6. Maintenance
.
4.7. Warnings
5. Problems Analysis and Solutions
5.1. General Problems and Solutions
7
- Turn off the meat grinder and disconnect it from the power source.
-
Clean the meat grinder after using it.
- Adjust the components after cleaning the meat grinder.
DANGER:
Any Maintenance activity must be performed with the meat grinder
disconnected from the power source.
- The meat grinder must be operated by a qualified worker.
- It must be operated in a safe working place.
-
Turning on the meat grinder:
It might be possible that it is not connected to the power source or
that there is no electric energy in the work place. Connect the meat grinder to the power source or
call your dealer if the case is worst.
-
Burnt Odor or Smoke:
The machine could have a problem with the electric circuit inside or
outside. In this case, contact your dealer.
-
Slow Auger Rotation:
There might be a problem with the motor, the gears of the grinder, or with
the power source. Please contact your dealer or an electric technician.
-
Abnormal Noise:
There might be a problem with the motor or the gears of the grinder. Please
contact your dealer to assist you.
-
Abnormal meat grinding:
It is probable that the main components of the meat grinder are not
assembled in the proper sequence. It is necessary to re-install the main components. It might be
also possible that one of the components is damaged. In this case, contact the dealer if a new
component is needed. See also section 5.2.