boho office BASIC LINE SQ650, Assembly And Operating Instructions Manual

Page: 10 / 32

10
Emergency instructions
Immediately remove yourself from the immediate vicinity of the table if
it should accidentally start moving. Do not put the desk frame into ope-
ration. Please have the desk frame repaired by a specialist company.
Only put the table frame back into operation after the repair has been
completed. Immediately take the table frame out of operation if unusu-
al events (noise, smoke, fumes, etc.) occur on the desk frame. Only put
the desk frame back into operation after repairs have been carried out.
If the safety devices (e.g. control panel) do not function properly, take
the desk frame out of operation immediately.
Particular hazard areas
When adjusting the desk frame, please make sure that no persons near
the desk frame, risk of injury is high. When setting up the desk frame,
make sure that it is completely free of potential collisions (e.g. pitched
roof, structural conditions, roller containers, waste paper basket, etc.)
in all possible
adjustable positions. Also ensure that there is enough room whenthere
are objects - e.g. computer equipment - on the desk. For desktops that
are160 cm wide, please maintain a lateral safety clearance of at least
25 mm from any other piece of furniture.

Safety Instructions

Service and maintenance
Please make sure that the product is always in perfect condition. If
necessary, have it checked by qualified personnel at regular intervals.
Do not carry out any repairs to the desk or the components yourself.
Do not make any structural changes to the desk. Only replace defective
components of the desk frame with new original parts from the manu-
facturer. Only use original spare parts from the manufacturer. Please
observe these assembly instructions.
Cleaning
Dust the desk frame with a dry cloth once a week. Clean the desk frame
with a damp cloth and mild detergent every 2 weeks.
Noise level of the desk frame
The noise level emitted by this desk frame
is <42 dB(A).