Bohmer-AG GRX8000-3G, Manual

Page: 10 / 28

GRX8000-3G
10
Do not exceed the current limit specified for any one receptacle. If an overloaded circuit causes
the AC circuit breaker to switch OFF. reduce the electrical load on the circuit, wait a few minutes
and then reset the circuit breaker.
5) DC Opertation
DC Terminals
The DC terminals may ONLY be used for charging 12-volt automotive type batteries. The
terminals are coloured red to identify the positive (+) terminal and black to identify the
negative (-) terminal. The battery must be connected to the generator DC terminals with
the proper polarity (battery positive to generator red terminal and battery negative to the
generator black terminal).
DC Circuit Protector (or DC Fuse)
The DC Circuit Protector (or DC Fuse) automatically shuts off the DC battery charging circuit
when the DC circuit is overloaded, when there is a problem with the battery, or the connections
between the battery and the generator are improper.
The indicator inside the DC circuit protector button will pop out to show that the DC circuit has
switched off. Wait a few minutes and push the button in to reset the DC Circuit protector.
Connecting the battery cables: