23
Before riding, check that the saddle is firmly mounted.
Dismantle the optional saddle
1. Screw the four (4) screws from the base of the saddle, using the hex wrench.
2.Remove the optional saddle of the footplate.
3. Replace the four (4) screws in the footplate holes.
4. Screw the four screws (4) using the hex wrench. Make sure that the screws
are tight before driving.
* Save the spanner for future use.
Position options for driving.
Before riding
Warning
Any bicycle that does not work properly can cause you to lose
control and fall. Inspect the entire bike thoroughly before
every ride, and do not ride it until any problems have been
corrected.
Use of your eKick 10 PRO
It's important that you know how your electrical step works. If you do not know
all the features of the step, you may lose control during use. Practice a couple
of times in a quiet environment and do not drive too hard to get to know the
features and features of the step.
A checklist before using the electric step.
Before using the step, make sure that all features work properly. If this is not
the case, please contact our customer service.
Warning
Any step that does not work properly can make you lose or lose control. Every
time you drive, you must fully check the step and correct any defects. If a
component is defective, first replace it.
