To record Conversations:
A female RCA connector is available on the
power cable to allow recording of
conversations. Attach the input of the
recording device to this connector.
In Case of Difficulties
No dial tone:
Ensure all the connections are correct and
secure.
Try a different telephone line. This unit will
only operate on analog telephone lines that
are compatible with standard telephones.
No telephone ring:
Ensure that the ringer volume switch is not
set to silence.
Echoes, voice clipping:
Do not move the unit during use.
Keep hands, papers, and other objects that
can reflect sound away from the unit during
use.
Speak at each location for several seconds at
the beginning of a call so that Confer-
ence Phone can be adapted to the sound
environments.
Try calling again to see if another telephone
line provides a better connection.
Note :
If the other party uses lower quality
telephones or a half-duplex
conference phone, there may be little
that can be done.
Muffled reception:
Speak closer to the microphones.
Excessive noise:
Noisy equipment, like ventilation fans or
computers, can make it difficult to hear
another party. All parties involved should
turn off any noisy equipment nearby.
Flash does not work:
Check that your telephone line provides
special features that use the flash button.
If more help is necessary, contact BogenÕs Technical Support department at
1-800-999-2809, Option 2.
Using the Conference Phone
To place a call:
Press the
On/Off
button to turn the unit on.
Dial the phone number.
To end a call:
Press the
On/Off
button to hang up and to
turn the unit off.
To answer a call:
Press the
On/Off
button when the phone
rings.
To adjust the speaker volume:
Press the Volume Up/Volume Down buttons
(VOL.+/VOL.-)
to increase or decrease the
volume level. LCD screen will change to
indicate volume level. (Does not affect Ring
volume.)
To use Flash features:
Press the
Flash
button to transfer a call, or to
make a 3-way call, depending on telephone
system features.
To mute:
Press the
Mute
button to prevent the other
party from hearing your conversation. The
LED status indicators will blink while mute
is engaged.
Press the
Mute
button again to resume the
conference call. LED status indicators are lit
continuously.
To store a phone number:
Be sure unit is turned off. Press the
Memory
button.
Select a speed dial number by pressing a
number between 0 and 9.
Enter the telephone number (up to 16 digits).
Press the
Memory
button again to store the
number.
Note :
You should keep a list of stored numbers
you entered for future reference.
To make a call using
Press the
On/Off
button to turn on the unit.
a stored number:
Press the
Memory
button.
Select the speed dial number (0 through 9) to
make a call.
To adjust the ringer volume:
Use the ringer volume switch on the bottom
of the Conference Phone to select ring
level-loud, soft, or silent (LED status
indicators flash ).
8
9
