13
6. Instructions for Use
6-1
UDR8011
Receiver
1. Parameter Setting
Push and hold the SET button to enter the
Setting mode. Push the
▲
/
▼
button to select
parameter. Push SET again to advance to
the next parameter.
When RX receiver is selected:
◎
FREQ: Frequency Setting
In 1 MHz
Select frequency with
▲
/
▼
In 0.025MHz
Select frequency with
▲
/
▼
Select the number of frequency first
in MHz and then in 0.025 MHz.
◎
SCAN: Channel Scan
SC oFF
CH: Channel will increment sequentially.
SC on
CH: Channel will scan for the next avail-
able channel, avoiding interference.
This function is deactivated.
UHF PLL TRANSMITTER
UBP
8011
UDR
8011
UHF PLL SINGLE CHANNEL
DIVERSITY RECEIVER
The default setting is 0.
◎
ATT: Audio Output Attenuation (XLR)
At oFF
No attenuation at audio output
At on
20 dB attenuation at audio
ouput
This function is deactivated.
◎
SQ: Squelch Sensitivity
-
5~+10dB
-5 is the maximum sensitivity.
+10 is the minimum sensitivity.
The default setting is 0.
◎
GROUP: Group / Channel
G: group
Select default group 1~6
CH: channel
Select default channel, 1~22 (max.)
Select the group when G is flashing;
select the channel when CH is flashing.
Note:
When Channel Scan is
ON
,
▲
/
▼
will scan
for the next available channel.
