Troubleshooting
Power LED does not light
Turn POWER switch ON.
Check power supply connection.
Tape plays too fast
The tape is not threading properly. Remove the cassette and tighten up any slack in the
cassette.
Output sounds distorted over telephone
Reduce volume or change type of output used.
Cannot remove cassette because head is engaged
Turn power off and then on. Wait for head to retract then remove
the cassette.
Care and Maintenance
The impact-resistant housing and quality construction of the PROHOLD virtually elimi-
nates the need for service or maintenance.
If the tape drive mechanism receives extensive wear, the tape head, capstan, and pinch
roller can be cleaned with isopropyl alcohol using a cotton-tipped applicator.
There are no user-serviceable components within the unit or the power supply. Refer all
servicing to qualified personnel.
9