Bogen NYQUIST NQ-S1810WT-G2 Installation Manual Download Page 8

www.bogen-ip.com  •  www.bogenedu.com

The NQ-S1810WT-G2 is warranted to be free from defects in materials and workmanship for five (5) 

years from the date of sale to the original purchaser. Any part of the product covered by this warranty 

that, with normal installation and use, becomes defective (as confirmed by Bogen upon inspection) 

during the warranty period will be repaired or replaced by Bogen, at Bogen’s option, with new or refur-

bished product, provided the product is shipped insured and prepaid to: Bogen Factory Service Depart-

ment: 4570 Shelby Air Drive, Suite 11, Memphis, TN 38118, USA. Repaired or replacement product(s) 

will be returned to you freight prepaid. This warranty does not extend to any of our products that have 

been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been 

modified or repaired or altered in any manner whatsoever, or where the serial number or date code has 

been removed or defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PUR-

CHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, 

EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT 

ALLOWABLE BY LAW. Bogen’s liability arising out of the manufacture, sale or supplying of products or 

their use or disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the 

price of the product. IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSE-

QUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS 

OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN 

IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Some States do 

not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 

exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have 

other rights which vary from State to State.
Products that are out of warranty will also be repaired by Bogen Factory Service Department -- same 

address as above or call 201-934-8500, at owner’s expense.  Returned products which do not qualify for 

warranty service, may be repaired or replaced at Bogen’s option with a previously repaired or refurbished 

items.   The parts and labor involved in these repairs are warranted for 90 days when repaired by the 

Bogen Factory Service Department.  All parts and labor charges as well as shipping charges will be at 

the owner’s expense.
All returns require a Return Authorization number.  For most efficient warranty or repair service, please 

include a description of the failure. 

 9/2019

Limited Warranty,  Exclusion of Certain Damages

Summary of Contents for NYQUIST NQ-S1810WT-G2









Reviews: