Bogen Nyquist C4000 Series User Manual Download Page 16

Page: 16 / 146

The left side, or navigation bar, of the dashboard (

"Figure 1-3, Dash-

board Areas” on page 4

), lists the areas of the C4000 system that you

can access. Accessibility to C4000 features and functionality is con-

trolled by your assigned role.

The top right section of the page header provides the facility name,

server time in hours and minutes, the username for the account and

the extension for the station. The facility name and time will not

appear if the screen is reduced in size, such as when viewing from a

phone or tablet.
Incoming Calls and Messages appear in the message page of the

dashboard.

Figure 1-3, Dashboard Areas

Note:

The navigation bar does not appear if you are not authorized

to make changes to the C4000 configuration. Instead, you see only

common tasks, such as making a page. If you are authorized to

make changes to the C4000 configuration, refer to the

Nyquist

C4000 System Administrator Manual

for information about per-

forming these tasks.

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands