© 2010 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2194-01A 1010
MPS1
Mini Pendant Speaker
Models MPS1B /MPS1W
Installation and Use Manual
Page 1: ... 2010 Bogen Communications Inc All rights reserved Specifications subject to change without notice 54 2194 01A 1010 MPS1 Mini Pendant Speaker Models MPS1B MPS1W Installation and Use Manual ...
Page 2: ... all the connected speakers CANNOT EXCEED the output power of the 70V amplifier amplifier power can exceed the sum of the speaker loads Low Impedance System Configurations When wiring together multiple MPS1 speakers that are set to 16 ohms it is important to calculate using Ohmʼs Law the total load that these speakers present to the amplifier The total load impedance of the interconnected speakers...
Page 3: ... the Safety Cable hole in the Suspension Attachment This Safety Cable is meant to be a safeguard only so when attaching to an anchor point allow for a small amount of slack in the wire as the Safety Cable should not bear any of the speakerʼs direct supension weight to keep the speaker hanging level MPS1 Speaker Cable Connections and Suspension Instructions In addition to the Main suspension Drop C...
Page 4: ...DENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS LOSS OF DATA OR LOSS OF USE DAMAGES ARISING OUT OF THE MANUFACTURE SALE OR SUPPLYING OF PRODUCTS EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES Some States do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you ...
