BCWR Receiver
POWER INPUT
16V AC
Powering the Receiver
Using the AC Power Adapter, connect the
AC Power Input (6)
to an AC outlet (
11
0-
1
20V AC).Turn
ON the BCWR Receiver using the
Power Switch (
1
)
.The IR Reception
LED Indicators (2)
will now
light either green or red, depending on whether the corresponding transmitters are ON or OFF.
Connecting the Audio Output
The BCWR Receiver provides an unbalanced, line-level mixed output to the
RCA Jack (3)
.This can be
connected to a mixer or a P.A. system using the supplied RCA to RCA audio cable.The audio of both
Channels A and B are mixed together at this output.The Channel A and B mix is dependent on the sepa-
rate Channel A and Channel B
Volume Control (4)
settings located on the back panel of the receiver.
Always make sure the mixer/P.A. volume is turned to minimum before plugging the audio cable into the
receiver or before turning the receiver ON/OFF (if the audio cable is already connected) to avoid possible
sound system damage.
Connecting the BCIRS IR Sensors
Connect the BCIRS Infrared Sensors to the BCWR Receiver by plugging both sensor coaxial-type plugs
into the
Infrared Sensor Inputs (5)
. Each sensor input will receive both Channels A and B.
5
Front
Rear
1
2
3
4
5
6
