background image

NOTICE:

Every effort was made to ensure that the information in this guide

was complete and accurate at the time of printing.
However, information is subject to change.

WARNING: 

To reduce the risk of Fire or Electric Shock, Do Not Expose this

apparatus to rain or moisture.

Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases shall be placed on the apparatus.

WARNING: 

Only connect unit to AC mains outlet providing protective

earthing connection.

NOTE:

Mains plug is used as disconnect device from the mains and shall

remain readily accessible and operable.

CAUTION: 

These servicing instructions are for use by qualified service per-

sonnel only. To reduce the risk of electric shock, do not perform
any servicing other than that contained in the operating  instructions
unless you are qualified to do so.

CAUTION: DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET, OR IN ANOTHER CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO PREVENT THE RISK OF SHOCK OR FIRE
HAZARD DUE TO OVER-HEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

Always follow these basic safety precautions when installing and using the unit:

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean unit with dry cloth. 
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong.

The wide blade, or the third prong, are provided for your safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when not used for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE ANY FRONT/BACK
COVERS OR PANELS. NO USER-SERVICEABLE
PARTS INSIDE. 

REFER SERVICING TO QUALIFIED PERSONNEL.

The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions.

The lightning flash with arrowhead sym-
bol, within an equilateral triangle, is in-
tended to alert the user to the presence
of uninsulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons.

Summary of Contents for BPA-60

Page 1: ...tch selectable Controls and Indicators Front Panel Illuminated on off power switch Rear Panel Input level control circuit breaker reset lo cut filter switch Power Consumption 120V AC 60 Hz 180W at full rated output Thermal Emissions full power 204 9 BTU hr Overload Protection Transient protection diodes electrical circuit breaker thermostat Operating Temperature Range 4 F to 131 F 20 to 55 C at ra...

Page 2: ...radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your o...

Page 3: ...g 2 on back page on the printed circuit board If an unbalanced input is required connect a jumper from the GND terminal to an adjacent input terminal Bridging Input Caution To avoid electric shock be sure to disconnect AC Power Cord before removing the cover of the amplifier unit Warning DO NOT perform any function requiring the removal of the cover of the amplifier unless you are qualified to do ...

Page 4: ...State to State Products that are out of warranty will also be repaired by the Bogen Factory Service Department same address as above or call 201 934 8500 The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department All shipping charges in addition to parts and labor charges will be at the owner s expense All returns require a Return ...

Reviews: