Bofan PT80, User Manual, Page: 15 / 18

13
NOTE
After setting time zone into tracker, you can get your local time in tracker reply message.
Restart
Command <password> RST <Type>
Remarks
z
Type=0 or null, to reboot PT80
z
Type=1 to reboot GPS
z
Type=2 to reboot GSM
Example:000000RST0
Reset PT80 to default
Command <password> DFT
Remarks DFT=Default
Example:000000DFT
Request Power
Command <password> RPO
Remarks RPO=Request Power Voltage
Get IMEI
Command <password> IME
Remarks To get tracker’s IMEI number
Note: IMEI number can’t be tracker ID number.
Example: 000000IME
Set Alarm
Command <password> SAL <Alarm type><Index1><Index2><Index3>
Remarks Alarm type =SPD, to set overspeed alarm
=GEO, to set Geo-fence alarm
=LPA, to set low power alarm
=SLP, to set sleep alarm
Index1=1, to alert on platform
=0, do not alert on platform
Index2=1, to send alert SMS
=0, do not send alert SMS
Index3=1, to call the preset SOS phone number
=0, do not call the preset SOS phone number
Index4=1, to take photo
=
0, do not take photo
Example 000000SALSLP100
That means, when there is sleep alarm, PT80 will send enter sleep alarm on platform, no
send alarm SMS to SOS number, no call to SOS number
Shake Alarm(or Move Alarm)
Command <password> SKA <index>
Remarks Index = 1, to send shake alarm SMS to SOS number when PT80 shakes
= 0, not to send shake alarm SMS to SOS number when PT80 shakes.
NOTES PT80 with built-in motion sensor to support this function.
Sleep Mode
Command <password> SLP <time period>
Remark 1.000000SLP300
It means tracker will enter sleep mode if keep still for over 300s