7
And for testing this part of the circuit, you can measure it's
output via two side of the C11 capacitor or the [-HV] testing
pad on the PCB, if installed correctly, it will have >=25V(or
-25V) HV output.
Step 5: CDS and IR part
The CDS and the IR part (
optional
) will be easy; We recommend
you to solder the CDS part first with two 22K resistors and one
CDS sensor(CDS should be installed on the PANEL side), and the
0u1F capacitor for the IR sensor; We can solder the IR receiver
later (if it has the IR function).
