Bodyworx L7800LP, Owner'S Manual

Page: 11 / 16

STEP 08
1. PLACE 50MM SQUARE END CAP (41) TO BOTH ENDS OF LEG PRESS
CONNECTOR (84) AND LEG PRESS SUPPORT (85) AS SHOWN.
2. INSTALL OIL BUSHING (52) INTO THE LEFT BASE (79) AND LEG PRESS
SUPPORT (85) AS SHOWN.
3. ATTACH LEG PRESS CONNECTOR (83,84), TO THE LEFT BASE (79), AND
LEG PRESS SUPPORT (85) SECURE PRESS BAR SHAFT (89,90), M16
WASHERS (70), AND M16 NUTS (66) AS SHOWN.
4. PLACE 2PCS 25*50MM SQUARE END CAP (43) AND 45MM SQUARE END
CAP (91) ONTO PEDAL (86) AS SHOWN.
5. INSTALL PEDAL SUPPORT (87) INTO PEDAL (86) WITH M12*125MM BOLT
(56), M12 WASHER (71) M12 NYLON NUT (67) AND QUICK PIN (101) AS
SHOWN.
6. ATTACH PEDAL SUPPORT (87) TO LEG PRESS SUPPORT (85) SECURE WITH
ADJUSTABLE POP PIN (49) AS SHOWN.
7. ATTACH REAR BACK PAD (88) TO BACK SEAT TUBE (104).
8. ATTACH SEAT (18) TO REAR SEAT FRAME (81) AS SHOWN.
-9-