Bodyworx L7200, Owner'S Manual

Page: 8 / 14

-7-
STEP 04
1. PLACE 50MM SQUARE CAP (41) INTO BOTH ENDS OF LEG EXTENSION
/ARM CURL BAR (14).
2. ATTACH SEAT SUPPORT (13) TO VERTICLE BEAM (10), WITH STEEL
PLATE (72) M10*75MM BOLT (50), M10 NYLON NUT (63), AND M10
WASHERS (68).
3. ATTACH SEAT ASSEMBLY UNIT (11) TO SEAT SUPPORT (13) AS SHOWN
4. ATTACH LEG EXTENSION /ARM CURL BAR (14) TO SEAT ASSEMBLY (13).
5. ATTACH BACK SEAT (20) TO VERTICLE BEAM (10) AS SHOWN.
6. ATTACH SEAT (19) TO SEAT ASSEMBLY (13) AS SHOWN.
7. SLIDE PAD HOLDERS (32) INTO THE HOLE PROVIDED.
8. SLIDE LEG EXTENSION/CURL PADS (29) ONTO PAD HOLDERS (32).
9. PLACE 1" ROUND CAP (40) INTO PAD HOLDERS (32).