19
MAINTENANCE
The safety and integrity designed into the
AIR SKIER
can only be maintained when the
AIR SKIER
is
regularly examined for damage and wear. Special attention should be given to the following:
1. Pull on the
Handle (44)
and verify that the System provides tension and the seat travel is smooth and
stable.
2. Clean the revealed surface of
Cord Pulley (27)
with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Check the condition of the
Drive Cord (52)
. Replace the
Drive Cord (52)
if it is damaged or broken.
5. Verify that the
Warning Label
is in place and easy to read.
6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
7. Worn or damaged components must be replaced immediately or the
AIR SKIER
removed
from service until repair is made.
8. Keep your
AIR SKIER
clean by wiping it off with an absorbent cloth after use.
22
