background image

 

IMPORTANT SAFETY PRECAUTIONS 

 
 
 

When using an electrical product, basic precautions should always be followed. 
Read all instructions before using this treadmill. 

GROUNDING INSTRUCTIONS 

This product must be grounded! If treadmill should malfunction or breakdown, grounding 
provides a path of least resistance for electrical current to reduce the risk of electrical shock. 
The product is equipped with a cord having an equipment-grounding conductor and a 
grounding lug. This plug must be plugged into an appropriate outlet that is properly installed 
and grounded in accordance with local codes and ordinances. 
 

DANGER!

 Improper connection of the equipment-grounding conductor can result in a risk of 

electric shock. Check with a qualified electrician or serviceman if you are in doubt as to 
whether the product is properly grounded. Do not modify the plug provided with the product- if 
it will not fit the outlet; have a proper outlet installed by a qualified electrician. 

ELECTRICAL SAFETY 

To reduce the risk of burns, fire, electrical shock, or injury to persons, take the following 
precautions. 

 

When plugged in, do not leave the treadmill unattended at any time. Unplug the treadmill 
from the power source when it is not in use. 

 

Do not use the treadmill if the unit is wet or the plug or cable is damaged or the treadmill is 
not working properly. Do not use a damaged or defective equipment. 

 

Keep the power cable and plug away from heated surfaces. 

 

Never place the power cord under carpeting or place any object on top of the power cord. 

 

Use only the power cord provided with this treadmill. 

 

Please turn the switch to the “off” position before shut down power supply, then remove 
the plug from the outlet. 

 
This exercise equipment is designed and built for optimum safety for the home use. However, 
certain precautions always apply whenever you operate any exercise equipment. Be sure to 
read the entire manual before assembly and operation of this machine. Also, please note the 
following safety precautions. 
 

 

 

 
 
 

WARNING! 

Connect this unit to a properly grounded outlet only. Please using special circuit with special power 

supply, plug with power supply must be connected with earth. 

 

Owner’s Manual                                                                                    4 

Summary of Contents for J1651EA




























Reviews: