Bodyworx AENERGISER, Owner'S Manual

Page: 6 / 12

ASSEMBLY INSTRUCTION
STEP 5
1. Release 4 Allen bolts (36) and wave
washers (35) which are pre-assembled
on the main frame (37).
2. Install the handlebar post (01) onto the
main frame (37). Turn the Tension
Control Knob back and forward to
make sure it is smoothly moving. If not,
re-assemble the tension control cables
(52, 55). Follow the instruction below to
assemble the tension cable.
3. Assemble the cables (53, 54) of the
exercise computer between the main
frame and the handlebar post.
4. Use bolt driver to fasten the Allen bolts
(36) and wave washers (35).
1. Draw the tension cable out of the
handlebar post. Make sure tension
knob is at 1 (minimum position).
2. Connect the tension cable head (a)
with the other cable head (b) by
pushing it into notch ©.Draw the tension
cable with the copper end (d) to insert
it to the metal bracket notch (e).
3. Fix the handlebar post (1) carefully to
the main frame (37) to avoid cutting off
the computer cable. Fasten the
handlebar post to the main frame with
4 Allen bolts (36) and wave washers
(35).
-06-