10
SM1900 SERIES INSTRUCTION MANUAL
【
BUTTON FUNCTIONS
】
UP (Encoder)
To make upward adjustment to each function data or increase training resistance.
DOWN
(Encoder)
To make downward adjustment to each function data or decrease training resistance.
MODE/ ENTER
To confirm all settings.
START/STOP
To start or stop workout.
RESET
To reset current setting and have the monitor switch to initial training mode for
selection.
RECOVERY
To test heart rate recovery status.
BODY FAT
In stop mode, press it for body fat measurement.
【
DISPLAY FUNCTIONS
】
TIME
Count up - No preset target, Time will count up from 00:00 to maximum 99:59 with each
increment is 1 minute.
Count down - If training with preset Time, Time will count down from preset to 00:00.
Each preset increment or decrement is 1 minute between 00:00 to 99:00.
SPEED
Displays current training speed. Maximum speed is 99.9 KM/H or ML/H.
RPM
Displays the Rotation Per Minute. Display range 0~15~999.
DISTANCE
Accumulates total distance from 00.00 up to 99.99 KM or ML. The user may preset target
distance data by pressing UP/DOWN button.
Each preset increment or decrement is 0.1KM or ML between 00.00 to 99.90.
CALORIES
Accumulates calories consumption during training from 0 to maximum 9999 calories.
(This data is a rough guide for comparison of different exercise sessions which cannot be
used in medical treatment.)
PULSE
User may set up target pulse from 0 - 30 to 230; and computer buzzer will beep when
actual heart rate is over the target value during workout.
WATTS
Display current workout watts. Display range 0~999.
OPERATING PROCEDURE
Power on:
1. Please connect power adaptor to DC JACK. Or the RESET key for 2 seconds to reboot the
console. LCD will have 2 seconds of all segments displaying on the screen (Drawing 1) with a
long beep.
Drawing 1