12
COMPUTER INSTRUCTIONS
FUNCTION BUTTONS
MODE
1.
Press the button to select TIME, DISTANCE and CAL to preset.
2. Press the button for selection function display value on LCD, or enter after setting.
3. Press the button and hold for 2 seconds to reset all value except Odometer to be zero.
(When the user replace batteries, all the values will reset to ZERO automatically.)
SET
1. To set up the target value of TIME, DISTANCE and CAL
2.
Press the button and hold for 2 seconds to speed up the increment.
RESET
1.
Press the button to reset function value when setting.
2.
Press the button and hold for 2 seconds to reset all value except Odometer to be zero.
(When the user replace batteries, all the values will reset to ZERO automatically.)
FUNCTIONS & OPERATIONS
1. Batteries
Installation
Please install 2 pieces of AA 1.5V batteries in the battery case on the back of monitor.
(Whenever Batteries are removed, all the functions values will be reset to zero.)
2. Auto
On/Off
While the user starts to do exercise, the display will show out the workout value automatically. Once
exercise halts for over 256 seconds, the display will turn off. However, the workout value of odometer
will be held. While the user starts to exercise again, the workout value of odometer will continue from
the previous displayed value and accumulate continuously.
3. Auto
Scan
After the monitor is powered on or the Mode key is pressed, the LCD will display all functions values
from Time-Calories-Odometer- Pulse- Speed- Distance. Each value will be held for 6 seconds.
