2015/2/2 V1.1+V1.1
22
move left and show words
『
PRESS LEVEL UP/DOWN TO SELECT PROFILE.
』
. Then
press
LEVEL ▲ or LEVEL ▼to select other PROFILE of HRC. HRC total has 60 %
、
65%
、
70%
、
75%
、
80%
、
85% of 6 kinds HRC mode.
3. When you select the HR program value, program windows will show the value and
flash, press ENTER to enter age setting steps.
4. Age setting steps: at this time, program windows will flash and show default value "30",
data windows will show
『
ENTER AGE<10-99>
』
. User can input number 0~9 to input
your age. When the value input is lower than 10, computer will not accept and will
show the min value 10 in program windows. When the value input is more than99,
computer will also not accept and will show the max value 99 in program windows.
Ages setting range is 10~99 years. When finished age setting, press ENTER for
storing and go to training time setting.
5. HR set value accounting formula=(220-AGE)*HR program controlling value
6. Training time set
：
at this time, program windows will flash and show training time's
default value "10", data windows will show
『
ENTER TIME <10-60>MINUTES
』
. USER
can input number 0~9 to set training time. When the input training time is lower than10,
computer will not accept and will show the min value 10 in program windows. When
the value input is more than 60, computer will also not accept and will show the max
value 60 in program windows. Training time's range is 10~60mins. After finishing the
training time setting, press ENTER key, program windows will flash and show "THR"
for 2 seconds, then start program.
7. When program finishing or working, press STOP Key and program windows will auto
show original Profile figure, data windows will show below training accounting items for
2 seconds by turns for twice, then program will back to start/steady condition.
8. During program working, data windows will show below information
：
metric
『
KMH
』：
show
『
LEVEL
』、『
RPM
』、『
DIST
』、『
WAT
』
1first for 1s and show
value for 10 seconds, then show
『
LEVEL
』、『
KMH
』、『
TIME
』、『
CAL
』
first for 1s
and show value for 10 seconds.
imperial
『
MLH
』
：
show
『
LEVEL
』
、
『
RPM
』
、
『
DIST
』
、
『
WAT
』
first for 1s and show
