en
MOUNTING OPTIONS
(Purchased
separately)
Belt Extenders can be attached to
the wheelchair using Band Clamps (Art No.
HW320), Frame Clamps (Art No. HW310),
Seat Mounting Brackets (Art No. HW200), or
T-Slot Fasteners (Art Nos. HKA6 & HKA10).
INSTALLATION
Attach belt extender to Evoflex.
Spring washer not used.
To prohibit belt rotation.
(Pin facing in)
Band Clamp or Frame Clamp
Seat Mounting Bracket
T-Slot Fastener
MOUNTING
Attach Belt Extender with Evoflex to wheelchair.
Refer to Evoflex product instructions for more detail.
(Spring washer optional)
Cut to length as needed using a
saw. Ensure cut location is as far
away as possible from mounting
hole being used.
4mm (5/32”)
Apply
threadlocker
PACKAGE CONTENTS
MOUNTING OPTIONS
INSTALLATION
MOUNTING
INSTALL
ATION
PACKAGE CONTENTS
MOUNTING OPTIONS
INSTALLATION
MOUNTING
To allow belt rotation. (Pin facing out)