11
12
Sending a Reading to SenseWear
®
wireless gateway
Place the weight scale with SenseWear
®
biotransceiver within 5 meters (15 feet) of the
SenseWear
®
wireless gateway.
Press 1 on the weight scale (
fi gure 2)
and wait for 0.0 reading and a beep before stepping
on to scale. Before stepping off the scale, wait for another beep.
The biotransceiver will immediately retrieve data off the weight scale. As soon as retrieval
is complete, the biotransceiver will send data to the wireless gateway.
Please consult the SenseWear
®
wireless gateway Operating Manual for further details.
1.
2.
3.
4.
Sending a Reading to SenseWear
®
armband
Press 1 on the weight scale (
fi gure 2)
and wait for 0.0 reading and a beep before stepping
on to scale. Wait for another beep before stepping off the scale.
The biotransceiver will immediately retrieve data off the weight scale. As soon as retrieval
is complete, the biotransceiver will send data to the armband.
The armband will also beep and vibrate once the transfer is successfully completed.
4.
5.
6.
Patents and patents pending. The BodyMedia
®
biotransceiver is covered by one or more of the
following patents when used with a BodyMedia
®
armband (e.g., SenseWear
®
armbands and
bodybugg™ armbands): United States Pat. Nos.: 6,527,711, 6,595,929, 6,605,038, 7,020,508;
European Patent Nos.: 1,292,217, 1,292,218; and various worldwide patents pending.
SenseWear
®
and BodyMedia
®
are registered trademarks of BodyMedia, Inc. Accu-Chek Advantage
is a registered trademark of Roche Diagnostic Corporation.
Copyright, Patent and Trademark Notices
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a circuit separate from the receiver.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation.
•
•
•
•
FCC 47CFR 15C TCB - 47 CFR Part 15 Subpart C
Intentional Radiator
Certifi cation Test
FCC 47CFR 15B clA - 47 CFR Part 15 Subpart B Unin-
tentional Radiators Class A Verifi cation
UL 60601-1 - UL Standard for Safety Medical Electri-
cal Equipment, Part 1:
General Requirements for Safety First Edition
CENELEC EN 60601-1-2 - 2001 - Medical Electrical
Equipment Part 1-2: General Requirements for Safety
- Collateral Standard: Electromagnetic Compatibility
- Requirements and Tests IEC 60601-1-2: 2001
CENELEC EN 60601-1-1 - Medical Electrical Equip-
ment - Part 1: General Requirements for Safety -
Collateral Standard: Safety Requirements for Medical
Electrical Systems.
CAN/CSA-C22.2 No.606.1-M90
ETSI EN 301 489-1 - Electromagnetic Compatibility
and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) Standard for Radio Equipment
and Services; Part 1: Common Technical Require-
ments V1.3.1
ETSI EN 301 489-3 - (Draft) Electromagnetic Compat.
and Radio Spectrum Matters (ERM); Harmonized EN
for ElectroMag. Compatibility (EMC) of Radio Comms.
Equip. & Srvs.; Pt. 3: Specifi c Conditions for Short-
Range Devices (SRD) Operating on Freqs Between 9
KHz and 40 GHz V1.3.1
ETSI EN 300 440-1 V1.3.1 (2001-07) Electromag-
netic compatibility and Radio spectrum Matters
(ERM);Short range devices; Radio equipment to be
used in the 1 GHz to 40 GHz frequency range
