ASSEMBLY INSTRUCTION
I . Notice of assembly
* An enough dimension will be required to assemble and properly use the machine.
* Please use floor padding, such as cardboard, to avoid scratching your floor during
assembly.
* The nuts and bolts have a little grease on them to protect them from corrosion. Please
keep a rag handy to wipe your hands.
* All plastic end caps and plugs have been assembled on the unit prior to shipment.
They are shown on the assembly drawings for reference in the event replacement
parts are needed.
* The machine uses several different lengths of bolts. Be careful to use the correct
length of bolt called for at each step of assembly.
* Do not touch the wires and cables attention when drilling.
II . Before you begin
Locate a comfortable work site. Assemble your machine in an open space with
ventilation and lighting, and with the help of other person. The machine posses a large
area, so you do not place it in living room.
Find your tools. You will need the following tools to assemble your machine.
．
Standard screwdriver
．
WD40 lubricant or Vaseline (if necessary)
Review all safety guideline on Page 2 of this manual.
III . Assembling your machine