11
parameters: High, Normal, Low, OFF. It
is
recommended
to
use
HIGH
sensitivity
in
areas
with
little
environmental interference and for
warmer, humid climates. Use LOW
sensitivity for areas that have a lot of
interference. The sensitivity of the PIR
is affected by temperature. Higher
temperatures lead to a lower sensitivity.
Please note that if Time Lapse is
set to off, then PIR Trigger can’t
be set to off
.
Default: Normal
PIR Interval
This interval shows how long the PIR
will be disabled after each triggering in
the ON mode.
During this time, the PIR sensor will
not react to any detected motion or
scheduled timer functions. The PIR
Interval can be set between zero
seconds to a maximum of 1 hour.
Press
►
to adjust the desired PIR
Interval time.
Default: 5 seconds
Format SD
All information on the SD card will be
deleted.
Make
sure
you
backup
important data on the SD card before
using this mode.
Default Set
Restores all settings back to default
values.
Version
Version information.
Summary of Contents for BG490 Series
Page 1: ...1 User Manual BG490 Series...
Page 4: ...2 1 2 Product View Front View...
