background image

1

Thank you for selecting the BODYCRAFT SPX-Mag magnetic indoor training cycle. The

BODYCRAFT SPX-Mag is one of the finest indoor training cycles available. By choosing the
BODYCRAFT SPX-Mag you have made a decision that will improve the health, fitness and well
being for you and your family. The SPX-Mag will provide an efficient low-impact cardiovascular
workout that will help improve energy levels and quality of life.

Cardiovascular training is vital for all ages and the BODYCRAFT SPX-Mag will provide an

effective workout, producing results that will encourage you to reach your fitness goals and
maintain the body you have always wanted. Spending 15 to 30 minutes a day, three times a week
is all you need to start seeing the benefits of a regular exercise program. We, at BODYCRAFT
want you to enjoy the full benefits of your exercise program, so please take the time to read this
manual thoroughly.

By doing so you will learn to exercise safely and more effectively, learn proper techniques and

be able to define your fitness.

Before beginning, this or any other exercise program consult your physician. This is especially

important for individuals over the age of 35 or persons with pre-existing health problems.
Recreation Supply, Inc. assumes no responsibility for personal injury or property damage
sustained by or through use of this product.

1.  This product must be assembled on a flat, level surface to assure its proper function.
2.  Clean all parts and the frame on a regular basis. We recommend warm, soapy water. Do not

use harsh or a brace of chemicals.

3.  Inspect and tighten pedals before every use. Failure to do so may result in serious injury.
4.  Inspect and tighten all parts before every use. Replace any warn parts immediately. Failure to

do so may result in serious injury.

5.  Keep children away from the BODYCRAFT SPX-Mag at all times.
6.  Keep your hands away from moving parts during operation.
7.  When adjusting the seat or handlebar make sure the lock lever is fully engaged. If not, the seat

may slip and cause serious injury.

8.  Always exercise with care to avoid injury.If you are unsure about the proper use of the

BODYCRAFT SPX-Mag, call your local BODYCRAFT dealer or our customer service
department.

As a quality exercise equipment supplier, we are committed to your complete satisfaction. If you
have questions or find missing or damaged parts, we will guarantee your complete satisfaction
through our authorized dealer service centers or our home office customer service department.

Please call your local dealer for assistance or contact BODYCRAFT at [email protected] or
800-990-5556 9 a.m. to 5 p.m. Eastern Standard Time. Our trained technicians will provide
immediate assistance to you free of charge.

 Congratulations and Thank You!

 Important Safety Notes

 Questions

Summary of Contents for SPX-Mag















Reviews: