10
STEP 5 Install Cable
C1
C9
C2
C3
C5
C7
C4
C6
C8
C4,C6
C8
C4
30
41
9
12
32
41
1
C6
(25) CABLE
1. Screw the Double Pulley Bracket (9) into the Top Plate (12) with
Selector Rod (11) 10 threads (2cm). As Show in C4,C6.
2. Insert the ball end of the Cable (25) into the front of the right side
Swivel Pulley Housing (8) and come out from top. Then attach two
pulleys as shown in C1,C9.
3. Route cable up to Top Frame (2) and along to down to left side pulley
in Double Pulley Bracket (9) next pulley over pulley mounted as
shown in C2,C3,C5,C7.
4. Coutinue along Top Frame (2) to next pulley. Then down to left side
pulley in Double Pulley Bracket (9) as shown in Fig 1. up to rear side
of next pulley in Top Frame (2), then up to
front of last pulley in Top Frame (2) as shown
in Fig 2.
5. Route cable over last pulley in top, exiting
toward rear, continue down to pulley
mounted behind Base Frame (1) as shown in
C8, under Weight Stack, and around pulley
at base next to column. Finally, route cable
up to left side of Swivel Pulley Housing (8)
and mount pulleys as shown in C1,C9.
IMPORTANT:
Cable length can be
adjusted by removing the Bolt on the
Top Plate (12) to turn the Selector Rod
(11) to remove slack or further down to
gain length.
Fig.1
Fig.2
C1,C9
C2,C3,C5,C7
C1
C2
C9
32
32
32
41
8
8
41
41
30
2
32
41
41
32
41
C3
C5
C7
9
12
11
35
IMPORTANT
